Advice Ls1 Heads to suit comp Cam??

[paok_18]

Hi there,

I am really close to purchasing this kit from ebay with a Comp Cam 231/239 113 LSA . Lift IN : 617 EX : 624. Kit includes Pushrods, Lifters, Dual Valve Springs, Titanium Retatainers (extra $88), Valve locks, Valve Seats, Valve locks, Valve seals
http://www.ebay.com.au/itm/COMP-281-...ht_3054wt_1165

I am wanting to get some heads to match this cam.. price wise around $2-3 for the heads inc postage..


Can someone recommend a good set of heads to match this cam??


James

[white lie]

An exchange set from Higgins.
3K on heads with that cam is overkill.

[1BEAST2NV]

what are u aiming for out of all this ??

u have a figure in mind or u just wonna do head and cam?

[Dee Jay]

With that size cam you wont want anything off the deck height.

[paok_18]

I really want too crack the 11's!! I have at the moment a 3500 stally, 1 3/4 pacies, twin 3", 3.91's with trutrac.. Really want a tough-street car with good torque!

[VYSHSV8]

Put a cam in a set of et streets and a good tune and you are in the 11's


Sent from the middle of Farkin no-where

[white lie]

Agreed. You could put just about any cam in with that combo and you'll run an 11 if the setup is right.
Should be pretty close now?

[paok_18]

I just thought that some heads would be better suited to this cam as opposed to others? I've considered AFR & mast etc. but not 100% which heads to go with..
Be pretty close too?

[white lie]

Close to running an 11... Should be doing a very low 12 now?

Who is bolting all of this together or tuning it? Have you spoken to them about it and what they recommend?

[paok_18]

Brad at Enhanced automotive to do all the work & tune..
I haven't spoke to him about the heads, but i am thinking that cos that comp package from ebay has vavle springs etc that the heads I buy will be heads alone with no valve springs, seats etc.. Just not sure what CC to buy intake/exhaust flow etc.. Was jut hoping someone could point me in the right direction!!