Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Thread: Annoying drone at idle after cam install!

  1. #1
    charlie15 is offline Forum Contributor Last Online: 13-08-2017 @ 10:16 AM
    Member Since
    Sep 2008
    Location
    Melbourne
    Age
    38
    Posts
    437

    Annoying drone at idle after cam install!

    Hey guys,

    Havent been on here since i sold my monaro years ago but I now have a VE SS manual as a daily which has had a cam package done to it.

    Its fitted with Sureflo headers and 100 cell cats mated to a 2.5" Di filippo catback.

    My issue is that since the cam, at idle, it drones like crazy and its really annoying (freeway and around the streets it sounds fine).

    Any ideas on what may be contributing to this bass drone or what i can do to resolve it? The drone is muffled and i know DF exhausts are somewhat muffled on idle usually.

    Will a 3" system help?

    Thanks heaps

  2. #2
    Micks is offline Permanently Banned Last Online: 19-12-2021 @ 07:11 AM
    Member Since
    Dec 2006
    Age
    57
    Posts
    0

    Re: Annoying drone at idle after cam install!

    Do you have any zorst leaks? What does your tuner have to say about it?

  3. #3
    charlie15 is offline Forum Contributor Last Online: 13-08-2017 @ 10:16 AM
    Member Since
    Sep 2008
    Location
    Melbourne
    Age
    38
    Posts
    437

    Re: Annoying drone at idle after cam install!

    nah no leaks at all, had that checked. tuner didn't say much, he tried to increase the idle and it was worse so he dropped it back down to about 750. not sure what else he could do

  4. #4
    Micks is offline Permanently Banned Last Online: 19-12-2021 @ 07:11 AM
    Member Since
    Dec 2006
    Age
    57
    Posts
    0

    Re: Annoying drone at idle after cam install!

    What about Steve from Sureflow, any comments?

  5. #5
    charlie15 is offline Forum Contributor Last Online: 13-08-2017 @ 10:16 AM
    Member Since
    Sep 2008
    Location
    Melbourne
    Age
    38
    Posts
    437

    Re: Annoying drone at idle after cam install!

    ill give him a buzz and see what he reckons thanks mate

  6. #6
    macca_779's Avatar
    macca_779 is offline One of the Top Contributors to the Forum Last Online: 12-07-2025 @ 09:50 AM
    Member Since
    Aug 2006
    Location
    Micks Mum
    Age
    43
    Posts
    8,862

    Re: Annoying drone at idle after cam install!

    What are the exhaust components. Usually not running a rear res does this.

  7. #7
    Red CV8 R's Avatar
    Red CV8 R is offline Fair Contributor to the Forums Last Online: 09-07-2025 @ 07:24 PM
    Member Since
    May 2002
    Location
    Sydney, Australia
    Posts
    2,937

    Re: Annoying drone at idle after cam install!

    I have CSV stainless short extractors (from sureflow), 100 cpi sureflow cats and twin 2.5" stainless DF exhaust and don't have this but I run the rear resonator.

  8. #8
    rodders188 is offline Occasional Contributor to the Forums Last Online: 14-03-2021 @ 11:26 PM
    Member Since
    May 2015
    Location
    Perth
    Posts
    204

    Re: Annoying drone at idle after cam install!

    Id if you can afford or in the future putting dpe headersa and cats on which will eliminate all drone. Sometimes mixed systems don't work right I have full DPE Bigboy system and cam also done to my ve ss sedan, and its completely drone free.

  9. #9
    charlie15 is offline Forum Contributor Last Online: 13-08-2017 @ 10:16 AM
    Member Since
    Sep 2008
    Location
    Melbourne
    Age
    38
    Posts
    437

    Re: Annoying drone at idle after cam install!

    Nothing has been modified which is why I'm finding it so strange. All resonators in place, nothing has been deleted

  10. #10
    whitels1ss's Avatar
    whitels1ss is offline Powertrain Control Last Online: 15-07-2025 @ 02:35 PM
    Member Since
    Feb 2007
    Location
    Australia
    Posts
    17,945

    Re: Annoying drone at idle after cam install!

    Quote Originally Posted by rodders188 View Post
    Id if you can afford or in the future putting dpe headersa and cats on which will eliminate all drone.
    Can't say that I would entirely agree with you there buddy!

    There is absolutely nothing wrong with Sureflo headers & cats which would cause any drone
    at idle, it's far more likely to be a problem somewhere else with the system.
    Last edited by whitels1ss; 05-07-2017 at 01:45 PM.

  11. #11
    Xjas is offline Forum Contributor Last Online: 06-02-2025 @ 09:25 AM
    Member Since
    Aug 2009
    Location
    Newy
    Posts
    890

    Re: Annoying drone at idle after cam install!

    What are the cam specs?
    Are you sure noise your hearing is actually drone? drone is usually described as the noise created by the engine running at the resonate frequency of the exhaust system which is mostly a factor of its length, thats why VEs drone at 1500-2000 rpm.
    Is the noise noticeable in a open car park or only in your garage/shed? my cammed VE used to make the most horrible noise in our carport which I could tune out somewhat by changing the RPM but could not get to go away 100% as it was due to the resonate frequency of the carport, was really annoying.

  12. #12
    charlie15 is offline Forum Contributor Last Online: 13-08-2017 @ 10:16 AM
    Member Since
    Sep 2008
    Location
    Melbourne
    Age
    38
    Posts
    437

    Re: Annoying drone at idle after cam install!

    Quote Originally Posted by Xjas View Post
    What are the cam specs?
    Are you sure noise your hearing is actually drone? drone is usually described as the noise created by the engine running at the resonate frequency of the exhaust system which is mostly a factor of its length, thats why VEs drone at 1500-2000 rpm.
    Is the noise noticeable in a open car park or only in your garage/shed? my cammed VE used to make the most horrible noise in our carport which I could tune out somewhat by changing the RPM but could not get to go away 100% as it was due to the resonate frequency of the carport, was really annoying.
    I can hear the drone when im outside of the car also when its idling (when im at the back of the car). Pretty sure its the di filippo. I've had di filippo systems on all my cars but this is the first one thats been cammed. The drone is noticeable no matter where the car is. Its a small cam vcm 532 215/223. when i first start the car it sounds fine, its only after about 20 seconds or so that this drone noise kicks in. maybe its the fact that im running a 2.5" and the di filippos are somewhat over muffled on idle adding to the drone...

  13. #13
    Micks is offline Permanently Banned Last Online: 19-12-2021 @ 07:11 AM
    Member Since
    Dec 2006
    Age
    57
    Posts
    0

    Re: Annoying drone at idle after cam install!

    Quote Originally Posted by charlie15 View Post
    nah no leaks at all, had that checked. tuner didn't say much, he tried to increase the idle and it was worse so he dropped it back down to about 750. not sure what else he could do
    Depending on where you are in Vic try either APS http://www.apsservicecentre.com.au/
    Or Chevs http://www.chevsautorepairs.com.au/

    Both know their LS stuff backwards!

  14. #14
    Red CV8 R's Avatar
    Red CV8 R is offline Fair Contributor to the Forums Last Online: 09-07-2025 @ 07:24 PM
    Member Since
    May 2002
    Location
    Sydney, Australia
    Posts
    2,937

    Re: Annoying drone at idle after cam install!

    I wouldn't describe it as drone but I know that when I went from standard opened cats to the Sureflow 100cpi cats I heard a lot more exhaust noise. I was quite surprised how much. My car has a similar cam to your car.

  15. #15
    rodders188 is offline Occasional Contributor to the Forums Last Online: 14-03-2021 @ 11:26 PM
    Member Since
    May 2015
    Location
    Perth
    Posts
    204

    Re: Annoying drone at idle after cam install!

    Quote Originally Posted by whitels1ss View Post
    Can't say that I would entirely agree with you there buddy!

    There is absolutely nothing wrong with Sureflo headers & cats which would cause any drone
    at idle, it's far more likely to be a problem somewhere else with the system.
    I don't agree with you entirely there Buddy! Theres nothing wrong with difillipo catbacks, its far more likely to be somewhere else in the system like the headers and cats

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. problems with idle after cam install and tune
    By Dijm8 in forum General Automotive
    Replies: 20
    Last Post: 21-09-2008, 11:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •