MY09.5 SSV Ute

[MADLS1]

no turbo's or blower??? HAHAHAHAHAHAHA


looks good mate.. lets hope that you do wash this one :P

[boyley]

Hey Jez, I am waiting on my Phantom SSV manual to arrive next month, gee we have great taste

Any chance you could renew the pics please?

Cheers Rob

[alian]

Come on Jezz, there is a blower on your front counter that will bolt straight on. You know you want to, Had plenty of practice in the last couple of weeks

[JezzaB]

Come on Jezz, there is a blower on your front counter that will bolt straight on. You know you want to, Had plenty of practice in the last couple of weeks

Nah im not going a blower on this one! Even if there is a Harrop H122 "laying around"

Plans are:

Exhaust
OTR
HDT Custom grind cam (325rwkw last one I installed)
Clutch
100hp Shot of NOS

Should net a nice ~400rwkw. But im putting this all on the back burner. Have to do a few more things to the TT Ute first.
Gave it a little squirt down the track 14.1 @ 102.7mph with a blistering 2.5x 60'

Plenty of time
Jez

[sld86]

was that lane 1 or 2 at the track jez. run in both lanes i guarentee one of them will be about .3or.4 of a sec quicker as one of them has a little hump in there

[matygeenz]

Well I decided it was time to get a new ute as a daily. The "old girl" has been retired and will be used at the track and on the weekends.

The new ute is a Black MY09.5 SSV M6. Picked it up with 50km on the clock, couldnt help myself and gave it a tune with 58km on it




Bog stock with the 95RON tank of fuel they gave me with the car then just a tune on it.



Jez

gez jeremy u only gave me 229wk with full exhaust. and u got 222 just with a tune?

[JezzaB]

Put a few little mods on the ute and have a couple more waiting to go on but so far with 1601km on the clock:

Xforce Polished Stainless 1 3/4" 4-1 Extractors
Xforce 3" Highflow Metal Cats
Xforce 3" Twin Stainless Catback
23x 23x 112lsa Cam
ORSSOM OTR

Sounds like it has a bit of a lump to it now

Other goodies to go on once they are painted.

[Rub]

How much power Jezz?

We need to know these things mate!

Hows the TT ute handling it up there in Qld?

[UTESRULE]

sounds like a good ute any pics of the new mods and sound file with the cam in

[alian]

Put a few little mods on the ute and have a couple more waiting to go on but so far with 1601km on the clock:

Xforce Polished Stainless 1 3/4" 4-1 Extractors
Xforce 3" Highflow Metal Cats
Xforce 3" Twin Stainless Catback
23x 23x 112lsa Cam
ORSSOM OTR

Sounds like it has a bit of a lump to it now

Other goodies to go on once they are painted.

Cant wait for a drive. sounds like it is on its way with the mods now. sounds like a great daily.
Cheers Ian

[JezzaB]

Not going to be everyones cup of tea but I like it and thats all that matters.




Just have to lower it now so it doesnt look like a 4x4

Jez

[255-LS1]

Not going to be everyones cup of tea but I like it and thats all that matters.

yep pretty much. different though.

Cheers

[Wastegate]

How's it idle with that size cam?
A mate of mine had a 232/234 installed and the workshop reckons that with something that size it's gonna be a pig and stall every now and then no matter what you do!

[JezzaB]

How's it idle with that size cam?
A mate of mine had a 232/234 installed and the workshop reckons that with something that size it's gonna be a pig and stall every now and then no matter what you do!

Idles great but you have to ride the clutch a bit to get going (I have 3.46 gears) and not use the wrong gear at low speed and it drives perfectly. Try and drive it like a stock or bolt on car and it would be a pig. Pulls well but really starts to shine at about 3800rpms then it will wind to over 6500+ very very quickly

[UTESRULE]

Not going to be everyones cup of tea but I like it and thats all that matters.




Just have to lower it now so it doesnt look like a 4x4

Jez

but i suppose u can get away with as u are HDT shop