my turbo 408 stroker vx berlina wagon

[ittwgn]

If your quest is to run 9's how come you only built a 4 point cage? You've got all the ingredients there to run a 9 if you can get it to hook up.

just went with this as its still a 60 kay daily driven car as you know to drop 8/10ths is huge retain that sleepa look with no cage etc if ever hit 9s will make the decision of what to do then then theres always this$$$$$!!! cheers

[hsv364]

just went with this as its still a 60 kay daily driven car as you know to drop 8/10ths is huge retain that sleepa look with no cage etc if ever hit 9s will make the decision of what to do then then theres always this$$$$$!!! cheers

If you do ever convert to 6 point make sure you run the bars behind the dash because running them in front of the dash becomes intrusive and looks cheap and nasty ..and really takes the street car cred away from it all

[CRAIG LS2 GD]

Your aloud one bend i have the template if you want it...

[ittwgn]

yeh cheers mate ive seen that in sedans like yours down thru speaker holes with one bend !!!all is good cheers !!!

[CRAIG LS2 GD]

No worries stiffens the launch up a heap too, i have been doing 138mph passes on one hand makes a huge difference picking up the rear point of the rails..car goes dead straight any way all the best with it cant wait to see the results you get..

[ittwgn]

No worries stiffens the launch up a heap too, i have been doing 138mph passes on one hand makes a huge difference picking up the rear point of the rails..car goes dead straight any way all the best with it cant wait to see the results you get..

hi bought these a few weeks back hopefully help with launch 1.774 60ft with 275 /40/17 due to big brakes change to stock ones fit these weld pro stars 15x8 5.5inch backspace with 275/50/15s hopefully a tenth or two here ???cheers

[EV1LR8]

hi bought these a few weeks back hopefully help with launch 1.774 60ft with 275 /40/17 due to big brakes change to stock ones fit these weld pro stars 15x8 5.5inch backspace with 275/50/15s hopefully a tenth or two here ???cheers

Nice buy mate, those rims will fantastic and i still cant get over how light myn are,

[ittwgn]

heres a dyno sheet !!!!!

[ls1vt209]

Saw this thing while Ryan was doing the cage on Friday, nice and clean and dead set sleeper.

Nice work on the times and setup. Would be good to see this thing into the 9's

Good luck with it.

Cheers

[JezzaB]

dont forget the cover over the 5 point harness clip. ive got the same. camlock doesnt need em though. good work mate

[slingshot]

That is some very good numbers you have there. Must be getting close to been back on the track now.
Dave

[ittwgn]

Saw this thing while Ryan was doing the cage on Friday, nice and clean and dead set sleeper.

Nice work on the times and setup. Would be good to see this thing into the 9's

Good luck with it.

Cheers

hi mate yeh ryan said a few people commented why bother caging that thing what an idiot!!!until he told them already run into the tens !!! that shut em up!!!haha yeh not to far away slingshot you learn things take time when modifying cars!!! cheers

[slingshot]

hi mate yeh ryan said a few people commented why bother caging that thing what an idiot!!!until he told them already run into the tens !!! that shut em up!!!haha yeh not to far away slingshot you learn things take time when modifying cars!!! cheers

Hey Martin

If you are around the Girraween area one day drop past, i would love to have a look and to see what Russo kit is like! i am building something very similar less turbo so far for my offroad racer. Also could show you the parts i want to put in your sleeper.

Dave

[ittwgn]

hi just an update had arp long wheel studs and standard brakes fitted had andra tech inspection done this afternoon passed with only a few minor things need collars on taxi bar of cage to prevent harness sliding sideways and need to seal/vent battery he checked everything on hoist etc so just need to complete paperwork and im back on track havnt run since may aiming for wed 22nd will be interesting what better tyre combo and another boost setting will do cheers

[ittwgn]

heres some shots with the prostars on the back full strip trim got some wtf looks fighting traffic for 1 and 1/4 hrs after tech inspection yesterday cheers!