The Ute Gallery

[11SLI]

be interesting to find out which mag its going on 53DUC

[SEDUCE]

yeah i have had two shoots and 2 more to go with my new mods cant say till its out there ..lol

[holdenute]

Long time reader of this thread, first ime posting. Just got mine back today from having some work done to my body kit.

VY SS ute ser1
6sp man
Pacemakers 3/4 4>1
Twin 2.5" cat back
two hole mode (standard filter)

Made 206.8rwkw which i was told by Dan at chipmaster was good for basicaly just an exhaust system.







ENJOY!!!

[boyley]

VY II SS Ute

Mods so far.

Twin cat back with double dumpies at rear.
CAI mod (Second hole)
K&N Air Filter
HSV MAF Pipe on its way
Lowered one from standard King Springs
Tint
More to follow.

http://images.cainer.net//uploads/DSCF1004.JPG
http://images.cainer.net//uploads/DSCF1008.JPG
http://images.cainer.net//uploads/DSCF1001.JPG
http://images.cainer.net//uploads/DSCF1005.JPG

[blackbettyhsv]

here's my old girl, bit of a oldy compared to whats on here but it is a ute after all. just sold it dude picks it up boxing day. would'nt read about it, been trying for 3 months to sell it, now after dude left deposit had 1/2 dozen people wanting it. you get that. stock 5 litre auto but done the job
http://s126.photobucket.com/albums/p98/blackbettyhsv/
blackbettyhsv - Photobucket - Video and Image Hosting
would have posted sooner but took a while to work out photo's

take 2 sorry guys did'nt finish job properly try again
<a href="http://photobucket.com/" target="_blank"><img src="http://i126.photobucket.com/albums/p98/blackbettyhsv/thedevilsute002.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

maybe this way will work lot of drama for the old girl

[DF_51]

Hey VU_SS_UTE

Im finally around to lowering the back of my ute some more

I am going to get some made up, but i cant think of how low Kings SSSL's are?

Do you think 4inch lowered springs should be lower than SSSL's??...

how do you messure how low your springs are compared to standard?

thanx dude

jjjjjgsdgvd

[ATTNSEEKR]

few little updates with my ute, Decided to go the Cam only route, for now. 380 rwhp and ran 12.2@113 (with standard clutch thats farked).

new rims and tint (VZ Clubby 19's and Lightning Tint) Rims are currently in getting painted black with silver mettalic thru it.

few pics

[boyley]

Check this hot design out

http://hvtm.totalcar.hu/image.php3?i...g&title=Holden SS Pickup FB Tuning

[VU_SS_UTE]

Long time reader of this thread, first ime posting. Just got mine back today from having some work done to my body kit.

VY SS ute ser1
6sp man
Pacemakers 3/4 4>1
Twin 2.5" cat back
two hole mode (standard filter)

Made 206.8rwkw which i was told by Dan at chipmaster was good for basicaly just an exhaust system.




ENJOY!!!

Whats that back bar? And do they do a VU one?

Hey VU_SS_UTE

Im finally around to lowering the back of my ute some more

I am going to get some made up, but i cant think of how low Kings SSSL's are?

Do you think 4inch lowered springs should be lower than SSSL's??...

how do you messure how low your springs are compared to standard?

thanx dude

jjjjjgsdgvd

Hey champ,

ah i cant remember how much the SSSLs are lowered or what the hub-guard is any more.

If you ring Kings they're pretty helpful, i think it was gary i spoke to originally when I was chasing the SSSLs

Also King themselves do custom springs, so it might be worth getting them to make up a set that 1/2 or 1 inch lower than SSSL cause you know they'll be right then.

im pretty sure the SSSLs are already probably close to 5 inches down from standard just by looking anyway.

[holdenute]

[QUOTE=VU_SS_UTE;809993]Whats that back bar? And do they do a VU one?

[QUOTE]

Its actually Based on the VU for U bar From street machine a few years back www.sve.net.au look here and speak to Jason

[6LtrLimo]

few little updates with my ute, Decided to go the Cam only route, for now. 380 rwhp and ran 12.2@113 (with standard clutch thats farked).

new rims and tint (VZ Clubby 19's and Lightning Tint) Rims are currently in getting painted black with silver mettalic thru it.

few pics

Love it Adam !!

[VU_SS_UTE]

[QUOTE=holdenute;810010][QUOTE=VU_SS_UTE;809993]Whats that back bar? And do they do a VU one?

Its actually Based on the VU for U bar From street machine a few years back www.sve.net.au look here and speak to Jason

Oh sweet thanks mate

[DF_51]

Hey champ,

ah i cant remember how much the SSSLs are lowered or what the hub-guard is any more.

If you ring Kings they're pretty helpful, i think it was gary i spoke to originally when I was chasing the SSSLs

Also King themselves do custom springs, so it might be worth getting them to make up a set that 1/2 or 1 inch lower than SSSL cause you know they'll be right then.

im pretty sure the SSSLs are already probably close to 5 inches down from standard just by looking anyway.

ohh cheers dude...

i ended up calling them, and they thought that the VR comodore rear SSL's will make it a little lower than the SSSL's would...

They seem to think hub to guard will be around the 290mm mark... i just finished putting them in, and im on about 310mm... its looking alot better...
Finally tucking some tyre geese! Hopefully they will sag some more soon, might go and grab some bags of sand..

ill get some photo's up soon...

cheers for your help!

[iamhappy46]

Sounds good

[VU_SS_UTE]

ohh cheers dude...

i ended up calling them, and they thought that the VR comodore rear SSL's will make it a little lower than the SSSL's would...

They seem to think hub to guard will be around the 290mm mark... i just finished putting them in, and im on about 310mm... its looking alot better...
Finally tucking some tyre geese! Hopefully they will sag some more soon, might go and grab some bags of sand..

ill get some photo's up soon...

cheers for your help!

Sweet mate that'd be good to see some pics, cause im after some lower ones too. Whats the part number?