Project LE

[IJ.]

Today!

Bolted the rear end back in this morning, just off to town to have the Discs machined as I don't have a mandrel to suit here and it'll cost me more than the job is worth to make one for a one off job..

[Micks]

Today!

Bolted the rear end back in this morning, just off to town to have the Discs machined as I don't have a mandrel to suit here and it'll cost me more than the job is worth to make one for a one off job..

Good excuse to go into town for a nice feed IJ

[IJ.]

Good excuse to go into town for a nice feed IJ

Nothing is open on Tuesday's Mick....

[IJ.]

Today!

Disc Brake conversion done, just have to make up the Hardlines and fill the Diff and it can come off the hoist!

[Micks]

Today!

Disc Brake conversion done, just have to make up the Hardlines and fill the Diff and it can come off the hoist!

Nice job IJ, why don't these threads have a "likes"/"thanks" button

[Smitty]

Nice job IJ, why don't these threads have a "likes"/"thanks" button

.. something that I have always scratched my head over too

[IJ.]

Nice job IJ, why don't these threads have a "likes"/"thanks" button

.. something that I have always scratched my head over too

Thanks guys, wondered the same thing...
------------
Today End!

Hardlines and fluid done!

[Micks]

.. something that I have always scratched my head over too

Reckon it would save the WM a lot of unwanted bloat in the board if they did....

IJ as I never did rear discs to my old HZ those calipers are mech. cable handrake?

[IJ.]

Reckon it would save the WM a lot of unwanted bloat in the board if they did....

IJ as I never did rear discs to my old HZ those calipers are mech. cable handrake?

Yeah they have a big Square acme thread from memory Mick, not the best set up but it works.

[Micks]

I don't think any GM handbrakes were, though luckily it's an auto so there's some saving grace there.
Reckon you & Cobalt are keeping this place going as otherwise it would be likened to watching grass grow.

[IJ.]

I don't think any GM handbrakes were, though luckily it's an auto so there's some saving grace there.
Reckon you & Cobalt are keeping this place going as otherwise it would be likened to watching grass grow.

Early Commodores weren't too bad, when they changed to the one piece band shoe they were not so good...

It just seems that way Mick there are heaps of interesting threads these days... <sarc>
-------------
Today End!

Crossing t's and dotting i's, just knocking over a few small detail things that might otherwise not get done before I build the Trans and finish up on this one!

[IJ.]

Today End!

Made up the mounts for the EL Falcon Electric fans and trimmed the shroud to fit!

[Smitty]

Today End!

Made up the mounts for the EL Falcon Electric fans and trimmed the shroud to fit!

hint... use a BIG (at least 40A) relay with these mothers
otherwise you risk melting wiring and harnesses

[IJ.]

hint... use a BIG (at least 40A) relay with these mothers
otherwise you risk melting wiring and harnesses

LOL yeah found that out back when I had the L98 in my Supra, I have a Davies Craig Digital controller for them that has 2 channels so they each get their own relay!

[KrisR]

hint... use a BIG (at least 40A) relay with these mothers
otherwise you risk melting wiring and harnesses

Or use 2 relays and circuit breakers/fuses.